Article

The Influence of Ionic Liquids Additives on the Tribological Properties of Molybdenum Amide Complexes

1 Guangdong Salvage Bureau, 510260 Guangzhou, China
2 Yantai Univesity, 264005 Yantai, China

https://doi.org/10.58531/esmmsi/1/4/3

Received: 4 November 2024 / Accepted: 14 December 2024 / Published: 16 December 2024

Ionic liquid as a new lubrication additive which form adsorption film on the surface of the friction pair, reduce friction and wear, and have good anti-wear performance and high-temperature resistance. The molybdenum ammonia complex can generate MoS2 on the friction surface and reduce the friction between friction pairs. There have been a lot of studies on the lubrication properties of molybdenum ammonia complex, or the ionic liquid additive alone. However, the corresponding research on the lubrication and wear-reduction properties of the two compounds steel need more search. Therefore, the effects of ionic liquid additives on the tribological properties of molybdenum-ammonia complexes were studied in this paper. It is found that the friction coefficient can be reduced by adding an ionic liquid additive, and the anti-wear effect of the molybdenum ammonia complex on lubricating oil can be improved. Among them, at 50℃ and 20N, the mixed oil sample of "base oil + molybdenum ammonia complex + ionic liquid additive" has the best comprehensive friction performance, and the friction coefficient is 0.062, which is 0.02 lower than that of the mixed oil sample of "base oil + molybdenum ammonia complex".

Molybdenum ammonium complex; Ionic liquid additive; Friction coefficient; Lubricating performance


Liu S., Tian B., Wang W. The Influence of Ionic Liquids Additives on the Tribological Properties of Molybdenum Amide Complexes. Eng. Solut. Mech. Mar. Struct. Infrastruct., 2024, 1(4), doi: 10.58531/esmmsi/1/4/3

Back to TopTop